Abstract:
The current–voltage, power–current, and spectral characteristics of high-power single-mode semiconductor lasers emitting at wavelengths of 1.5–1.6 μm are studied experimentally. It is shown that a laser with a cavity length of 1.6 mm and a mesa-stripe width of 3 μm mounted in a housing 11 mm in diameter may emit a power higher than 300 mW. Mounting of lasers on C-mounts makes it possible to achieve powers exceeding 400 mW. In the case of mounting in standard 14 pin DIL packages, the laser power at the exit of a single-mode fibre-optic cable (FOC) was no lower than 100 mW, which, taking into account 50% losses upon radiation coupling into the FOC, corresponds to the laser diode power higher than 200 mW. It is shown that the differential resistance of a laser depends not only on the laser crystal length but also on the type of mounting (in copper housings 11 mm in diameter or on C-mounts). The dependences of the laser wavelength and spectral width on the pump current and ambient temperature are presented. The characteristic temperatures of laser diodes are determined.
Citation:
P. V. Gorlachuk, A. V. Ivanov, V. D. Kurnosov, K. V. Kurnosov, A. A. Marmalyuk, V. I. Romantsevich, V. A. Simakov, R. V. Chernov, “Experimental studies of 1.5–1.6 μm high-power asymmetricwaveguide single-mode lasers”, Kvantovaya Elektronika, 48:6 (2018), 495–501 [Quantum Electron., 48:6 (2018), 495–501]
Linking options:
https://www.mathnet.ru/eng/qe16840
https://www.mathnet.ru/eng/qe/v48/i6/p495
This publication is cited in the following 11 articles:
Bull. Lebedev Physics Institute, 50:suppl. 4 (2023), S405–S417